"To do a good job, you must first improve your tool". In view of the problems of short life and poor wear resistance of PDC bit under hard and complex formation conditions, CCTEG Xi'an Research Institute (Group) Co., Ltd. adopted graphene composite reinforcement technology, innovated and developed PDC cutters with strong wear resistance and high impact toughness, and developed graphene-reinforced PDC arc Angle bit. Field tests were carried out in 12393 centralized return roadway of a mine of Sichuan Coal Group. The lithology of this formation is mainly fine sandstone, coarse sandstone with gravel and coarse sandstone. The lithology is broken and the robustness coefficient is about 10, which puts forward higher requirements for wear resistance and impact toughness of drill bit. Through the test, a single graphene bit can reach 393.5 meters of life, while the cutter wear is slight, the average service life is 1.5 times that of the conventional arc Angle bit, which has been highly recognized by the mine.
The successful application of graphene-enhanced PDC arc Angle bit provides an effective solution to solve the difficult problem of short drill life in hard broken stratum, and lays a foundation for the promotion and application of the product in other areas. This is another embodiment of the intensive and intensive agriculture of CCTEG Xi'an Research Institute, which takes root in the coal mine drilling technology field and solves customers' problems with "technical power".
